| 1 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Top -Duct and Starting Collars - Flat on Top (and C/F the other way)
|
| 2 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Top -Center of End #2 is to the Right of the center of End #1
|
| 3 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Top -Center of End #2 is to the Left of the center of End #1
|
| 4 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Top -Right side of End #2 is to the Right of right side of End #1
|
| 5 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Top -Right side of End #2 is to the Left of right side of End #1
|
| 6 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Top -Left side of End #2 is to the Right of left side of End #1
|
| 7 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Top -Left side of End #2 is to the Left of left side of End #1
|
| 8 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Bottom -Flat on Bottom (and C/F the other way)
|
| 9 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Bottom -Center of End #2 is to the Right of the center of End #1
|
| 10 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Bottom -Center of End #2 is to the Left of the center of End #1
|
| 11 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Bottom -Right side of End #2 is to the Right of right side of End #1
|
| 12 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Bottom -Right side of End #2 is to the Left of right side of End #1
|
| 13 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Bottom -Left side of End #2 is to the Right of left side of End #1
|
| 14 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Bottom -Left side of End #2 is to the Left of left side of End #1
|
| 15 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Right - Center Flare (C/F) other way - No offset
|
| 16 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Right - Offset is measured Top Up
|
| 17 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Right - Offset is measured Top Down
|
| 18 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Right - Offset is measured Bottom Up
|
| 19 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Right - Offset is measured Bottom Down
|
| 20 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Right - Center of End #2 is Above the center of End #1
|
| 21 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on Right - Center of End #2 is Below the center of End #1
|
| 22 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on LeftCenter Flare (C/F) other way - No offset
|
| 23 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on LeftOffset is measured Top Up
|
| 24 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on LeftOffset is measured Top Down
|
| 25 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on LeftOffset is measured Bottom Up
|
| 26 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on LeftOffset is measured Bottom Down
|
| 27 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on LeftCenter of End #2 is Above the center of End #1
|
| 28 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Flat on LeftCenter of End #2 is Below the center of End #1
|
| 29 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Starting Collar - 1 piece pattern
|
| 30 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Starting Collar - 2 piece pattern - L Style
|
| 31 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Rectangular Duct - 1 piece pattern
|
| 32 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Rectangular Duct - 2 piece pattern - U Style - Wide
|
| 33 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Rectangular Duct - 2 piece pattern - U Style - Narrow
|
| 34 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Rectangular Duct - 2 piece pattern - L Style
|
| 35 |  | Rectangular Fittings | Transitions | Duct and Starting Collars - Rectangular Duct - 4 piece pattern
|
| 36 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Top and Right
|
| 37 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Top and Left
|
| 38 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Bottom and Right
|
| 39 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Bottom and Left
|
| 40 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Top and Right
|
| 41 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Top and Left
|
| 42 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Bottom and Right
|
| 43 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Bottom and Left
|
| 44 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Top, Left, and Right
|
| 45 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Bottom, Left, and Right
|
| 46 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Right, Top, and Bottom
|
| 47 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Left, Top, and Bottom
|
| 48 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Top, Left, and Right
|
| 49 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Bottom, Left, And Right
|
| 50 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Right, Top, and Bottom
|
| 51 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Flat on Left, Top, and Bottom
|
| 52 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center Flare both ways - No offsets (4 piece fitting)
|
| 53 |  | Rectangular Fittings | Transitions | Rectangular Transitions - One-piece Centered Reversal - No offsets
|
| 54 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the RIGHT of the center of End #1
|
| 55 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the LEFT of the center of End #1
|
| 56 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right Side of End #2 is to RIGHT of right side of End #1
|
| 57 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right Side of End #2 is to LEFT of right side of End #1
|
| 58 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the Right of left side of End #1
|
| 59 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the Left of left side of End #1
|
| 60 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is ABOVE the center of End #1
|
| 61 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is BELOW the center of End #1
|
| 62 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center Flare (C/F) other ways - No offsets
|
| 63 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the RIGHT of the center of end #1
|
| 64 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the Left of the center of End #1
|
| 65 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right side of End #2 is to the RIGHT of right side of End #1
|
| 66 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right Side of End #2 is to the LEFT of right side of End #1
|
| 67 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the right of left side of End #1
|
| 68 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the left of left side of End #1
|
| 69 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center Flare (C/F) other way - No offset
|
| 70 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the RIGHT of the center of End #1
|
| 71 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the LEFT of the center of End #1
|
| 72 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right side of End #2 is to the RIGHT of right side of end #1
|
| 73 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right side of End #2 is to the LEFT of right side of end #1
|
| 74 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the RIGHT of left side of End #1
|
| 75 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the LEFT of left side of End #1
|
| 76 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center Flare (C/F) other way - No offset
|
| 77 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the RIGHT of the center of End #1
|
| 78 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the LEFT of the center of End #1
|
| 79 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right side of End #2 is to the RIGHT of right side of end #1
|
| 80 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right side of End #2 is to the LEFT of right side of end #1
|
| 81 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the RIGHT of left side of End #1
|
| 82 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the LEFT of left side of End #1
|
| 83 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center Flare (C/F) other way - No offset
|
| 84 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the RIGHT of the center of End #1
|
| 85 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the LEFT of the center of End #1
|
| 86 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right side of End #2 is to the RIGHT of right side of end #1
|
| 87 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right side of End #2 is to the LEFT of right side of end #1
|
| 88 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the RIGHT of left side of End #1
|
| 89 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the LEFT of left side of End #1
|
| 90 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the RIGHT of the center of End #1
|
| 91 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the LEFT of the center of End #1
|
| 92 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right Side of End #2 is to RIGHT of right side of End #1
|
| 93 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right Side of End #2 is to LEFT of right side of End #1
|
| 94 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the Right of left side of End #1
|
| 95 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the Left of left side of End #1
|
| 96 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the RIGHT of the center of End #1
|
| 97 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Center of End #2 is to the LEFT of the center of End #1
|
| 98 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right Side of End #2 is to RIGHT of right side of End #1
|
| 99 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Right Side of End #2 is to LEFT of right side of End #1
|
| 100 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the Right of left side of End #1
|
| 101 |  | Rectangular Fittings | Transitions | Rectangular Transitions - Left side of End #2 is to the Left of left side of End #1
|