1 |  | Rectangular Fittings | Offsets | vertical center flare - center flare horizontaly
|
2 |  | Rectangular Fittings | Offsets | vertical center flare - flat on left
|
3 |  | Rectangular Fittings | Offsets | vertical center flare - flat on right
|
4 |  | Rectangular Fittings | Offsets | Vertical center flare - center of end #2 is on the right of the center of end #1
|
5 |  | Rectangular Fittings | Offsets | Vertical center flare - center of end #2 is to the left of the center of end #1
|
6 |  | Rectangular Fittings | Offsets | Vertical center flare - right side of end #2 is to the right of right side of end #1
|
7 |  | Rectangular Fittings | Offsets | Vertical center flare - right side of end #2 is to the left of right side of end #1
|
8 |  | Rectangular Fittings | Offsets | Vertical center flare - left side of end #2 is to the right of the left side of end #1
|
9 |  | Rectangular Fittings | Offsets | Vertical center flare - left side of end #2 is to the left of the left side of end #1
|
10 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - top up - center flare horizontally
|
11 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - top up - flat on left
|
12 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - top up - flat on right
|
13 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is on the right of the center of end #1
|
14 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is to the left of the center of end #1
|
15 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the right of right side of end #1
|
16 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the left of right side of end #1
|
17 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the right of the left side of end #1
|
18 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the left of the left side of end #1
|
19 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top up - flat bottom - center flare horizontally
|
20 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top up - flat bottom - flat on left
|
21 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top up - flat bottom - flat on right
|
22 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is on the right of the center of end #1
|
23 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is to the left of the center of end #1
|
24 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the right of right side of end #1
|
25 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the left of right side of end #1
|
26 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the right of the left side of end #1
|
27 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the left of the left side of end #1
|
28 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top down - center flare horizontally
|
29 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top Down - flat on left
|
30 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top Down - flat on right
|
31 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is on the right of the center of end #1
|
32 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is to the left of the center of end #1
|
33 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the right of right side of end #1
|
34 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the left of right side of end #1
|
35 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the right of the left side of end #1
|
36 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the left of the left side of end #1
|
37 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top Down - Flat on Bottom - Center flare horizontally
|
38 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top Down - Flat on Bottom - Flat on Left
|
39 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Top Down - Flat on Bottom - Flat on Right
|
40 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Center of end #2 is on the right of the center of end #1
|
41 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is to the left of the center of end #1
|
42 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the right of right side of end #1
|
43 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the left of right side of end #1
|
44 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the right of the left side of end #1
|
45 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the left of the left side of end #1
|
46 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Flat on top - bottom up - center flare horizontally
|
47 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Flat on top - bottom up - Flat on left
|
48 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Flat on top - bottom up - Flat on right
|
49 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is on the right of the center of end #1
|
50 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is to the left of the center of end #1
|
51 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the right of right side of end #1
|
52 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the left of right side of end #1
|
53 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the right of the left side of end #1
|
54 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the left of the left side of end #1
|
55 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Flat on top - bottom down - Center flare horizontally
|
56 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Flat on top - bottom down - Flat on Left
|
57 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Flat on top - bottom down - Flat on Right
|
58 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is on the right of the center of end #1
|
59 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is to the left of the center of end #1
|
60 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the right of right side of end #1
|
61 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the left of right side of end #1
|
62 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the right of the left side of end #1
|
63 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the left of the left side of end #1
|
64 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Bottom Down - Center flare horizontally
|
65 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Bottom down - flat on left
|
66 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - bottom down - flat on right
|
67 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is on the right of the center of end #1
|
68 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is to the left of the center of end #1
|
69 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the right of right side of end #1
|
70 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the left of right side of end #1
|
71 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the right of the left side of end #1
|
72 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the left of the left side of end #1
|
73 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Bottom Up - center flare horizontally
|
74 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Bottom Up - Flat on Left
|
75 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - Bottom Up - Flat on right
|
76 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is on the right of the center of end #1
|
77 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - center of end #2 is to the left of the center of end #1
|
78 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the right of right side of end #1
|
79 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - right side of end #2 is to the left of right side of end #1
|
80 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the right of the left side of end #1
|
81 |  | Rectangular Fittings | Offsets | Offsets with square heels and sqare throats at an angle - left side of end #2 is to the left of the left side of end #1
|
82 |  | Rectangular Fittings | Offsets | Offsets with Square heel and Throats - Double Offset - No Change - No Transition
|
83 |  | Rectangular Fittings | Offsets | Offsets with Square heel and Throats - Z-Bow - offset is measured Top UP
|
84 |  | Rectangular Fittings | Offsets | Offsets with Square heel and Throats - Z-Bow - offset is measured Top Down
|
85 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Vertical Center flare - center flare horizontally
|
86 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Vertical Center flare - flat on Left
|
87 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Vertical Center flare - Flat on Right
|
88 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
89 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
90 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
91 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
92 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
93 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
94 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -top up - center flare horizontally
|
95 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -top up - flat on left
|
96 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -top up - flat on right
|
97 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
98 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
99 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
100 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
101 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
102 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
103 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top up - flat bottom - center flare horizontally
|
104 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top up - flat bottom - flat on left
|
105 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top up - flat bottom - flat on right
|
106 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
107 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
108 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
109 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
110 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
111 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
112 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top down - center flare horizontally
|
113 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top Down - flat on left
|
114 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top Down - flat on right
|
115 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
116 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
117 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
118 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
119 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
120 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
121 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top Down - Flat on Bottom - Center flare horizontally
|
122 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top Down - Flat on Bottom - Flat on Left
|
123 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Top Down - Flat on Bottom - Flat on Right
|
124 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
125 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
126 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
127 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
128 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
129 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
130 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Flat on top - bottom up - center flare horizontally
|
131 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Flat on top - bottom up - Flat on left
|
132 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Flat on top - bottom up - Flat on right
|
133 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
134 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
135 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
136 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
137 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
138 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
139 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Flat on top - bottom down - Center flare horizontally
|
140 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Flat on top - bottom down - Flat on Left
|
141 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Flat on top - bottom down - Flat on Right
|
142 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
143 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
144 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
145 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
146 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
147 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
148 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Bottom Down - Center flare horizontally
|
149 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Bottom down - flat on left
|
150 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -bottom down - flat on right
|
151 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
152 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
153 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
154 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
155 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
156 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
157 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Bottom Up - center flare horizontally
|
158 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Bottom Up - Flat on Left
|
159 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -Bottom Up - Flat on right
|
160 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is on the right of the center of end #1
|
161 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -center of end #2 is to the left of the center of end #1
|
162 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the right of right side of end #1
|
163 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -right side of end #2 is to the left of right side of end #1
|
164 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the right of the left side of end #1
|
165 |  | Rectangular Fittings | Offsets | Offsets with Radius heels and radius throats -left side of end #2 is to the left of the left side of end #1
|
166 |  | Rectangular Fittings | Offsets | Offsets with radius heel - No change offset, radius heels, and no throat
|
167 |  | Rectangular Fittings | Offsets | Offsets with radius heel - No change double offset - to pass under joints
|
168 |  | Rectangular Fittings | Offsets | Offsets with radius heel - C-Bow - Offset is measured top up
|
169 |  | Rectangular Fittings | Offsets | Offsets with radius heel - C-Bow - Offset is measured top down
|
170 |  | Rectangular Fittings | Offsets | Offsets with radius heel - S-Bow - offset is measured top up
|
171 |  | Rectangular Fittings | Offsets | Offsets with radius heel - S-Bow - offset is measured top Down
|